Disclosure
This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Introduction
BOURDSERK Reptile Heat Lamp Stand is the better pick for standard terrariums and dual-lamp setups because it holds up to three lampshades on an all-metal frame, while MECESOR suits tall tanks with its 15.7-73.6 inch adjustable height and 360° swing arm. The BOURDSERK reaches 16-31 inches with a 9-13 inch hook cantilever, versus the MECESOR’s four connecting rods that lock into six heights up to 73.6 inches.
- Choose BOURDSERK if you run two or three lamps over a 10-120 gallon terrarium — it carries dual lampshades with a 7 pound load capacity on a 15.7 x 15.7 inch pedestal base.
- Choose MECESOR if your tank is tall or you want to clear the lid easily — the 360° rotatable spring swing arm and 7.87-73.6 inch height range let you hang the lamp much higher.
I compared these two on height range, lamp capacity and mounting method, working only from the listed specifications. Build materials, base design and swing arm flexibility were the deciding factors.
🏆 Quick Picks — My Top Recommendations
Best Overall: BOURDSERK Reptile Heat Lamp Stand
Holds dual lampshades with a 7 pound load capacity on a 16-31 inch metal stand — Check Price →
Runner-Up: MECESOR Reptile Lamp Stand
Reaches 73.6 inches with a 360° swing arm for tall tanks — Check Price →
I lined up the numbers that actually matter for tall tanks — height range, load capacity and mounting method — so you can see where each stand wins.
Full Specs Comparison
| Specification | BOURDSERK Reptile Heat La | MECESOR Reptile Lamp Stan |
|---|---|---|
| Brand | BOURDSERK | MECESOR |
| Material | ✅ Metal | — |
| Item Weight | ✅ 1.98 pounds | — |
| Height Range | ✅ 16″-31″ | 15.7-73.6 inch |
| Dimensions LxWxH | ✅ 15.7 x 15.7 x 31 in | — |
| Color | ✅ Black | — |
| Light Type | — | ✅ Halogen |
| Bulb Base | — | ✅ E26 |
| Light Color | — | ✅ Warm white |
| Swing Arm | — | ✅ 360° adjustable |
| Base Plate | — | ✅ Wider base plate |
| Lampshade Capacity | ✅ Dual lampshades | — |
| Terrarium Size | ✅ 10-120 gal | — |
| Adjustable Height | ✅ Yes | ✅ Yes |
The MECESOR’s 73.6 inch maximum height beats the BOURDSERK’s 31 inches by a wide margin, but the BOURDSERK’s 7 pound load capacity and dual-to-triple lampshade support make it the sturdier choice for multi-lamp setups.
Individual Product Breakdown
I focused each mini-review on the specs that decide whether a stand works over a tall tank: height range, lamp capacity, load limit and base design. Here’s how each one actually shapes up.
BOURDSERK Reptile Heat Lamp Stand
16″-31″ height | Dual lampshade capacity | 7 lb load | 15.7 x 15.7 x 31 in
- 【Sturdy & High Load-Bearing】 The reptile lamp stand is made of...
- 【Wide Range of Uses】This floor metal light stand is more widely used...
- 【Convenient Free Adjustment】: The height of the lamp stand can be...
I like this one because it’s built to carry more than a single lamp. The all-metal frame holds dual lampshades (or even three) with a 7 pound load capacity, which is plenty for a heat bulb plus a UVB fixture. The 16″-31″ height range and 9″-13″ hook cantilever give you solid adjustment for a 10-120 gallon terrarium. The catch is the top height — 31 inches won’t clear a genuinely tall tank, so it’s best for standard setups.
✅ Pros
- Holds dual lampshades with a 7 lb load capacity
- Adjustable 16″-31″ height with a 9″-13″ cantilever
- Fits terrariums from 10-120 gallons
- 90-day warranty with free replacement
❌ Cons
- Maxes out at 31 inches — too short for tall tanks
- Base may need to sit in the tank gap or be weighted
- Only 1.98 lb, so it’s lighter than heavier-duty stands
MECESOR Reptile Lamp Stand
15.7″-73.6″ height | 360° swing arm | 5.28 lb | Alloy steel
- NEW UPGRADED MORE STABLE WIDER BASE PLATE - MECESOR heating lamp stand...
- HEIGHT ADJUSTABLE TO 7.87-73.6IN - MECESOR reptile hanging light stand...
- SUPER FLEXIBLE SPRING SWING ARM - The swing arm with hook can be freely...
This is the one I’d reach for if height is the whole point. Four connecting rods lock into six positions from 7.87″ all the way to 73.6″, and the 360° spring swing arm lets you push the lamp aside to open the tank lid. The enlarged, thickened base plate and 5.28 lb alloy steel build keep it planted. My only real gripe is that you have to keep the swing arm and base aligned or it wants to tip.
✅ Pros
- Reaches up to 73.6″ across six height settings
- 360° rotatable swing arm for easy tank access
- Enlarged, reinforced base plate for stability
- 2-year manufacturer warranty
❌ Cons
- Can tip if the swing arm isn’t kept over the base
- Heavier at 5.28 lb, less portable
- Single hook — not built for dual lampshades
Which One Should You Buy?
The right stand really comes down to how tall your tank is and how many lamps you’re running. I’ve matched each one to the buyers it genuinely fits.
BOURDSERK Reptile Heat Lamp Stand is right for you if…
- You’re running a heat bulb plus a UVB fixture and need to hang dual lampshades on one stand.
- Your tank sits in the 10-120 gallon range and a 16″-31″ height works fine.
- You want a lighter stand you can reposition easily — it weighs just 1.98 lb.
MECESOR Reptile Lamp Stand is right for you if…
- You have a genuinely tall tank and need the lamp to reach up to 73.6 inches.
- You want to swing the lamp 360° out of the way when you open the lid.
- You’d rather have a heavier 5.28 lb alloy steel base that stays planted.
❌ Who Should Skip All of These?
If you only need to clip a single small bulb onto the rim of a compact tank, a clip-on lamp holder is simpler and takes up no floor space. These floor stands shine when you need height and reach that a clip can’t give you.
For the most common buyer with a standard terrarium and two lamps, I’d go with the BOURDSERK for its dual-lampshade capacity and 7 pound load limit. Only step up to the MECESOR if your tank is tall enough to need that 73.6 inch reach.
Frequently Asked Questions
Which reptile lamp stand is better for tall tanks, BOURDSERK or MECESOR?
For tall tanks, the MECESOR wins clearly. It adjusts from 15.7″ all the way to 73.6″ across six height settings, while the BOURDSERK tops out at 31″. If your tank is genuinely tall, the BOURDSERK simply can’t reach high enough — the MECESOR is the one to get.
Can the BOURDSERK hold more than one lamp?
Yes, and this is where it beats the MECESOR. The BOURDSERK holds dual lampshades (or even three) with a 7 pound load capacity, so you can run a heat bulb plus a UVB fixture on a single stand. The MECESOR uses a single hook, so it’s one lamp per stand.
Is the MECESOR worth the extra money over the BOURDSERK?
It depends entirely on your tank height. If you need to reach above 31 inches, the MECESOR is the only one of the two that can do it, so the extra spend is justified. For a standard 10-120 gallon setup where 31 inches is enough, the BOURDSERK does more per stand with its dual-lamp capacity.
Which stand is more stable?
The MECESOR is the heavier, sturdier build at 5.28 lb of alloy steel with an enlarged, reinforced base plate. That said, it can still tip if you don’t keep the swing arm over the base. The BOURDSERK weighs just 1.98 lb and may need its base seated in the tank gap or weighted for long-term stability.
Does the MECESOR swing arm really rotate 360°?
Yes, the spring swing arm rotates a full 360°, which makes it easy to push the lamp aside when you open the tank lid. Just keep the swing arm and base in the same direction — MECESOR warns against letting the arm sit parallel to the ground. The BOURDSERK uses a fixed hook cantilever with a 9″-13″ reach instead.
Can I use either stand on a table instead of the floor?
The MECESOR is the more flexible of the two here — it can sit on the floor or a table, and it ships with a non-slip mat to protect surfaces. The BOURDSERK is designed as a floor pedestal stand with a 15.7 x 15.7 inch base. If portability between floor and table matters, go with the MECESOR.
My Final Verdict
I’m naming the BOURDSERK Reptile Heat Lamp Stand as my overall winner because it does more per stand — it holds dual lampshades (even three) with a 7 pound load capacity, and the 16″-31″ height plus 9″-13″ cantilever covers most 10-120 gallon terrariums. The MECESOR is the runner-up, and it’s the better pick for genuinely tall tanks with its 15.7″-73.6″ range and 360° swing arm.
If you’re on the fence, ask yourself one thing: does your lamp need to sit above 31 inches? If yes, the MECESOR is the only one of the two that reaches. If no, the BOURDSERK’s dual-lamp capacity makes it the smarter buy.
Winner: BOURDSERK Reptile Heat Lamp Stand
- 【Sturdy & High Load-Bearing】 The reptile lamp stand is made of...
- 【Wide Range of Uses】This floor metal light stand is more widely used...
- 【Convenient Free Adjustment】: The height of the lamp stand can be...
Best for standard terrariums and multi-lamp setups — it holds dual lampshades with a 7 pound load capacity on a 16″-31″ metal frame.
Runner-Up: MECESOR Reptile Lamp Stand
- NEW UPGRADED MORE STABLE WIDER BASE PLATE - MECESOR heating lamp stand...
- HEIGHT ADJUSTABLE TO 7.87-73.6IN - MECESOR reptile hanging light stand...
- SUPER FLEXIBLE SPRING SWING ARM - The swing arm with hook can be freely...
Best for tall tanks — it reaches up to 73.6 inches with a 360° swing arm and a heavier 5.28 lb alloy steel base.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.